CABF-R-001 rev1 [Pipelines]; Can piping running within the premises of the user be considered conveyance pipelines (Art 1 Para 2(a))?
CABF-R-002 rev1 [FPSO]; Are offshore process / production installations included within the scope of the PED Guideline related to: Article 1 Para 2(a); Article 1 Para 2(i);Article 1 Para 2(n) and current Guideline A/37; current Guideline A/27?
CABF-R-003 rev1 [Test pressure]; Which hydrostatic test pressure shall be used for pressure equipment under PED jurisdiction that is designed, constructed and tested according to a National Code?
CABF-R-004 rev1 [Module A1]; What activity is required of a Notified Body when performing monitoring of the final assessment as required by Module A2? In particular must the notified body assess the manufacturer's technical documentation?
CABF-R-005 rev2 [Safety Valve Setting]; Is it possible to CE-mark pressure equipment designed in a way that involves a known or obvious risk for misuse? [...]
CABF-R-006 rev2 [Safety valve setting]; What is the meaning in PED Annex I, clause 7 heading: Certain Pressure Equipment?
CABF-R-007 rev2 [Conditions EC Type Exam]; For what conditions should a new EC type-examination be considered for different versions of pressure equipment?
CABF-R-009 rev2 [Design requirements]; What must be considered by the Notified Body or user inspectorate when examining the design of pressure equipment in the context of modules B, G and H1?
CABF-R-010 rev1 [Welding document approval]; Are the welding procedure qualification records certified by an organisation that is today a NB or [...] acceptable [...] even though the organisation was not a NB [...] at the time of qualification?
CABF-R-011 rev2 [Identification of manufacturer]; Is the notified body identification number sufficient information to satisfy [...] Article 6(6) and 8(3); regarding marking with the name and address [...] of the manufacturer or the importe?
CABF-R-012 rev1 [Tri-clamp]; What are the material certification requirements in respect of ferrule type clamps similar to that shown below, bearing in mind WGP guideline G/8?
CABF-R-013 rev1 [Module A1 certificate requirements]; Should the Notified Body issue a document to the manufacturer according to module A2 or C2?
CABF-R-015 rev1 [IFU inspection intervals]; Must a manufacturer provide information concerning in-service inspections in the Operating Instructions?
CABF-R-016 rev3 [Own Brand Labelling]; May a manufacturer place pressure equipment on the market under his name when it has been produced and conformity assessed by another manufacturer under the Pressure Equipment Directive (PED)?
CABF-R-017 rev1 [Declaration of Conformity]; Is the Notified Body or the User Inspectorate responsible for the content of the Declaration of Conformity issued by the manufacturer, or his authorized representative established within the Community?
CABF-R-018 rev1 [Design Software]; A manufacturer applies to a Notified Body for a module that includes the NB to assess the design. [...] the manufacturer submits the drawings and an output summary [...]. Is this acceptable?
CABF-R-019 rev3 [Welder Prolongation]; With reference to WGP F/6, F/8 & F/12, what conditions should be applied for the validity period of welding personnel qualifications [...] in Categories II, III & IV, where harmonised standards are not used?
CABF-R-020 rev1 [Use of B1 and H1]; Is it possible to use an EU-type Examination Certificate issued under Module B1 [...] to satisfy the design examination requirements for a manufacturers Quality System under Module H1 [...]?
CABF-R-021 rev1 [Fatigue Testing]; [...] Is it possible to apply module B (design type) if the manufacturer opts for fatigue testing to verify the adequacy of design?
CABF-R-022 rev1 [Commissioning Tests]; [...] Has the manufacturer [...] to subject himself to the rules for registration, operation, inspection prior to service and in-service etc. decreed by the member state in which he erects his assembly?
CABF-R-023 rev1 [Archiving X-Rays]; [...] Does the obligation to archive these [quality-relevant] documents also include the original radiographs?
CABF-R-024 rev1 [PMA for QA]; Is a particular appraisal of a PMA by a notified body required [...] even if the manufacturer has an approved quality system for design, manufacture, final inspection and testing according to module H?
CABF-R-025 rev1 [Hot Commissioning]; What are the activities preceding and following the point in time at which an assembly is placed on the market by the manufacturer and who bears responsibility?
CABF-R-026 rev1 [Lamellar Plates]; Is it possible to CE mark and certify lamellas [...] under a conformity assessment module or module combination according to the PED [...]?
CABF-R-027 rev1 [QM Assessment Material Manufacturer]; What must a competent body take into account when assessing the quality system of a material manufacturer?
CABF-R-028 rev1 [Validity of QA Approval]; [...] May the manufacturer affix the CE marking and the number of this notified body to the pressure equipment if the final assessment is made after the date of expiry or withdrawal of notification?
CABF-R-029 [Validity of EC Type Examination]; What is the time of validity of an EC type-examination certificate?
CABF-R-030 rev2 [Conflict B1 and F]; May the notified body Y verify the product to be in conformance with [...] PED even though notified body Y [...] can not satisfy himself that the requirements of Annex I and design code are met?
CABF-R-031 rev1 [Bursting Discs]; [...] Can the manufacturer justify not carrying out a proof test of the bursting disc holder?
CABF-R-032 rev1; [Pressure gauge calibration]; Pressure gauges are used for indication of the pressure of hydrostatic tests during (final) inspection by manufacturers under supervision of a notified body. This applies to conformity modules A1, B, C1, ...
CABF-R-033 rev1 [Language product standard]; Is it admissible for a Notified Body to conduct conformity assessment utilizing a product standard and supporting standards not available in a verified translation [...]
CABF-R-034 rev1 [SV set pressure fire engulfment]; When a safety accessory is applied to a refrigeration system for the prevention of failure due to external fire is it permissible that the pressure surge [...]
CABF-R-036; [Glass as material]; What are material certification requirements for category II, III or IV pressure equipment with main pressure-bearing parts of glass?
CABF-R-037 [Sight glasses]; What are the certification requirements for sight glass materials?
CABF-R-038 [Validity of EU design Module H1]; How long shall the EU design examination certificate (module H1) be valid?
CABF-R-039 [Module H model of type]; How long shall the EU design examination certificate (module H1) be valid?
CABF-R-040 rev 1; [Monitoring state of the art (modules B und H1)]; Should this technical, regulatory and normative monitoring be a part of the conformity assessment of the design according to these modules?
CABF-R-041; [Welding of SPVD]; Is it acceptable that the welding processes are approved and welders or welding operators are qualified by a notified body that is notified for the tasks of Directive 2014/68/EU but not for the tasks of Directive 2014/29/EU?
CABF-R-042; [Certification to ISO9001]; What are the essential differences between a quality system certified to ISO9001:2015 and the requirements of the Directive’s quality modules?
CABF-R-043 rev1; Permanent joining qualification category I
CABF-R-044; [Blast furnace interconnecting piping]; Blast furnaces and other connected pressure equipment, are excluded from the scope of PED. Does this apply to interconnecting piping between items of pressure equipment mentioned in Art. 1 para. 2 (k)?
CABF-R-045 [Leak test assembly, NoBo attendance]; Does the integration test of the assembly, consisting of a leak test, need to be witnessed by the EU-CAB as part of the “proof test”?
CABF-R-046 [Validity NDT personnel certificate]; Do valid certificates which were issue under the 2012 edition before 3.4.2024 still provide presumption of conformity with the essential requirements of the PED?
CABF-R-047 [Welder examination]; Is it mandatory for the competent third party to conduct a theoretical examination of the person? Who decides whether such an examination should be conducted?
CABF-R-048 [Couplings]; Is a device intended to connect two ends of pipes together, commonly referred to as "coupling", as pressure accessory according to article 2 (5) of the PED?
CABF-R-049 [A2 C2 with more than one NoBo]; Is it acceptable, that the manufacturer engages more than one Notified Body to perform the monitoring in accordance with PED Modules A2 or C2 for products within the same scope?
